LED Flexible Strips Light DC12V Epistar SMD5050 RGB IP65 Waterproof
30LED 60LED
1. Products Specification:
SMD5050 RGB LED Strips Kit
(with controller and power supply) | Model | AD-CSC-FS5050-30RGB-Kit | AD-CSC-FS5050-60RGB-Kit |
| Color | Red:700-900MCD
Blue:350-550MCD
Green: 1000-1200MCD |
| CCT | RGB |
| LED type | San'an 5050 chip |
| IP Grade | IP20, IP65 |
| SMD Quantity | 30LEDs | 60LEDs |
| Input Voltage | DC12V | DC12V |
| Lumen/SMD | 10-12LM | 10-12LM |
| Power/meter | 7.2W | 14.4W |
| PCB Width | 10mm | 10mm |
2. Application:
1. Light up colorful home life ,DIY household lights for hallways,
stairs, trails ,windows,
2. Light up colorful life hotels decoration use,Theaters, clubs,
shopping malls, festivals and performances
3. Architectural decorative lighting,Archway, canopy and bridge
edge lighting, Security lighting and Emergency,
4. Extensively applied in Backlighting for signage letters,
concealed lighting and advertisement sign lighting
5. Applicable for automobile & Airplane model decoration, contour
lighting or border.
3. Description:
RGB LED Strips need a power supplier and a 24key/44 keys RGB
controller to control the led strips, use the controller, you can
change everycolor you want. It use SMD 5050 RGB led chips, also
SMD3014 RGB LED Chips. SMD5050 RGB LED Strips have 2 model, one
model is 30pcs led chips per meter, another is 60pcs led chips per
meter. So the power is different. One is 7.2W per meter, another is
14.4W per meter. Both 2 types voltage is DC12V, can make IP20 non
waterproof, only can use indoor. And IP65, IP67 and IP68 are
waterproof, which can use for outdoor lighting.
4. Advantages:
1. Waterproof flexible LED strip (IP65 Waterproof level)
2. Superbright 5050 SMD RGB LED, high intensity and reliability
3. Maintenance free, easy intallation
4.60 SMD RGB LEDs per meter, total 300 LEDs for 5 meters
5. Adhesive backing tape for secure and easy application to most
surfaces
6. Every 3-LED cutable without damaging the rest strip
7. Ultra-bright but running at low temperature
8. Flexible ribbon for curving around bends
5. Operating instruction for RGB LED Strip:
5.1. Specification for power supply:
Supply voltage:110-220VAC / 50-60HZ
Output voltage: DC12V
Output power: 5A/60W 2A/24W
Product Size: 145*65*85mm
Output: 3 channels RGB signal
Max load: 5 meters
Working temperature: -20~60℃
Control mode: Infrared remote controller
5.2. The 24 key infrared remote controller for use:
| Brightness+ | Brightness- | OFF | ON |
| Static red | Static Green | Static Blue | Static white |
| Static orange | Static yellow | Static cyan | Static purple |
| Auto change | 3 base colors jump and effect of running water | 3 base colors fade change | Speed+ |
| Flash | Colorful jump | Colourful synchronized | Speed- |
5.3. 24 Key RGB controller Description:
1. When the static, “ Brightness+ ” “ Brightness- ” to adjust the
brightness of colors.
2. Dynamic time, “ Speed+ ” “ Speed- ” to adjust the speed of
change, to facilitate debugging, is only divided into “high speed”
“medium speed” “slow speed” “slowest” total four kinds of speed.
3. Dynamic static free to switch, and has a memory function, you
can save the state before power.
5.4. 24 Key RGB Controller Function:
1. In constant power, press the OFF button and then press the ON
key, the controller can remember the previous state of the LED
2. After lighting in LED, turn off the power 30S, and then turn on
the power, the controller can remember the previous state of the
LED
3. After lighting the LED, turn off the power, and then turn on the
power, the controller will automatically enter the next state.
