LED Flat Panel Light 48W 600mm 3 Years Surface Mounted 11mm 120
Degree White
1. Description:
Ado LED Flat Panel Light use high brightness led chips as the light
source, it is SMD2835 with 26LM, make flat panel light luminous
efficiency up t0 100LM/W, it is more energy saving than traditional
lamps, so it is widely used for office, hospital, meeting room and
school classroom. Not only the high efficiency, but also bring soft
and uniform lighting effect, this is because we adopt Janpan
mitsubishi PMMA light guide plate, the technology is laser dot,
bring higher light transmittance more than 90% without dark zone.
Our led flat panel light is good for eyes, and it is green
environmental., long life span is 30000 hours.
2. Important Product Material:
1. LM-80 certified LED with high brightness and low decay
2. Famousl brand LED: Osram, Samsung, Soul. LG. Epistar
3. Internaitonal Brand Driver: Tridonic, Meanwell. Lifud
4. TUV SAA CB ENEC certified Driver, very stable and long life
5.3. UL Listed led lighting guide plate from Japan Mitsubishi, good
light transmittance.
3. Specification:
1.Brand: Ado lighting (or given by buyer)
2.Power : 48W
3.Input Voltage:85-265V, 50/60Hz
4. Aluminum frame + Aluminum LED plate + PMMA light guide plate
5. IP Rate:IP44
6. Lumen Efficiency:100lm/w
7. Driver output: DC42V,017A
8. CCT:2700-6500K
9. Power Factor:>0.95;
10. THD:<20%
11. CRI(Ra):>80
12. Energy saving up to 90%
13. 3 years warranty.
14. Working Lifespan:50000 hours
15. Working Temperature:-20~+40 degree
4. Light Guide Plate Details:
| Brand | Japan Mitsubishi |
| Material | PMMA |
| Height | 3mm |
| Light Transmittance | 90% |
| Technology | Laser Dot |
5. Advantages:
1. Aluminum Housing: Aluminum material fixture is good for heat
dissipation.
2. LED Driver: PF>0.9, flicker free, CE passed driver, stable
isolated IC constant current project
3. LED Chip: Latest imported SMD4014 or SMD2835 led chips for
ensuring higher ;umen with LM80, low decay, long lifespan
4. Slim Design: panel light height is only 11mm, perfect slim
design
5. Light Guide Plate: Adopt Japan Mitsubishi PMMA LGP, 3mm
thickness, uniform lighting, no dark area, soft lighting effect,
90% light transmittance.
6. Diffuser: Taiwan CHIMEI supplied material for diffuser, better
glare control
6. Packing Information:
| Inner Box Size: | 66.5*64*4.5cm |
| Product Net Weight: | 3.6kg |
| Packing Size: | 68.5*65.5*24.5cm |
| Packing Quantity: | 5pcs |
| Packing Gross Weight: | 18.5kg |
7. Product Installation:
1. Before installation to ensure the normal work of the flat lamp,
suck back top mounting plate onto the flat lamp.
2. Please according to the actual pitch screw fixed to the ceiling
or wall.
3. Both hands lift flat lamp to make the middle hole mounting plate
alignment have been fixed screws, to enter, and then move into
place.
4. The led driver is fixed to the ceiling or wall, connected to the
power supply and AC circuit.
