Square Dimmable LED Panel Light Ceiling Mounted SMD2835 0-10V Black
Aluminum
1. Description:
0-10V dimmable led panel light is a type which use 0-10V dimmable
led driver, it is different with triac dimmable, the features of
0-10V dimmable led drivers are:
1. Integrate three dimming functions(1-10V or PWM signal or
resistor)
2. Compatible with 0-10V and 1-10V dimming function
3. International universal input voltage 90～265VAC
4. With active PFC function
5. Protection type: short circuit / over current / over voltage
With this 0-10V dimmable led driver, our led panel light become
dimmable led panel light, it can be installed into the ceiling, it
is ceiling mounted, or recessed mounted. We use SMD2835 led chips,
high lumen with high CRI. The square housing can make black color
and other color, such as sliver, bronze.
Housing material is aluminum, which is good for heat dissipation.
2. Advantages:
1. Use slap-up import material
2. Saving energy up to 50%, replace the energy saving lamp
3. Special high-quality chips, more high intensity, less light
decline and longer life more than 60, 000h
4. Special aluminum base board. Heat dispel is double than the
common one
5. Super-thin design. Only 12mm thick;
6. No UV and IR radiation.
7. Applying the international patent and have the CE RoHS
Certificationand the test Report.
3. Specification:
| Model | AD-EPR-PAL-18W |
| Input Voltage | AC85-265V |
| LED Brand | Taiwan Epistar |
| Lumen | 1550LM ± 100 LM |
| Color Rendering Index | 80RA |
| P rank | IP44 |
4. Technical data:
Power: 18W
LED Chip: SMD2835
LED Type: 0.2W
LED Lumen: 24-26LM
LED Quantity:90pcs
CCT: 3000K / 4000K /6000K
Lumen: 1550LM ± 100 LM
Color Rendering Index: 80RA
Material: Aluminum(fixture)+PMMA(LGP)
Beam angle: 120°
Operation temperature: -20℃~+60℃
Lighting Distance: 1-4meters
Mounting height: 2-3meters
Place of Origin: China
Approval mark: CE RoHs
5. Application:
1. Home: Living room, Kitchen, Bedroom, Bathroom and etc..
2. Commercial: Hotel, Meeting room, Office, Stair passageway, Lobby
and etc..
6. Quality Control Capacity:
A. QC Team: 8 persons.
B. Integrated QC system is implemented in every aspect of
production for 4 times strictly check. Raw materials-during
productive process-finished products-after aging before pack( one
by one)
C. More than 200square meters aging room for each goods aging
24hours
7. Precautions:
1. The power must be turned off during installation. Do not install
it with electricity.
2. The product must be connected to a matching constant current
drive power source before it can be used normally. If the driver is
DC24V, please notice that the DC24V input of the constant current
drive power source must be connected with a power adapter and
cannot be directly connected to the mains. If the driver is
AC85-265V, then can be directly connected to the mains.
3. When selecting the power adapter, the power adapter power should
have a certain margin. The total power of the fixture divided by
0.8 is the output power of the power adapter to ensure the
long-term stability and life of the power adapter.
